Description

Mechanics of Materials 11th Edition Hibbeler (Solution Manual)

Solution Manual for Mechanics of Materials, 11th Edition, Russell C. Hibbeler, ISBN-13: 9780137605521

Table of Contents

1. Stress
1.1 Introduction
1.2 Equilibrium of a Deformable Body
1.3 Stress
1.4 Average Normal Stress in anAxially Loaded Bar
1.5 Average Shear Stress
1.6 Allowable Stress Design
1.7 Limit State Design

2. Strain
2.1 Deformation
2.2 Strain
3. Mechanical Properties of Materials
3.1 The Tension and Compression Test
3.2 The Stress–Strain Diagram
3.3 Stress–Strain Behavior of Ductile and Brittle Materials
3.4 Strain Energy
3.5 Poisson’s Ratio
3.6 The Shear Stress–Strain Diagram
*3.7 Failure of Materials Due to Creep and Fatigue

4. Axial Load
4.1 Saint-Venant’s Principle
4.2 Elastic Deformation of anAxially Loaded Member
4.3 Principle of Superposition
4.4 Statically Indeterminate Axially Loaded Members
4.5 The Force Method ofAnalysis for Axially Loaded Members
4.6 Thermal Stress
4.7 Stress Concentrations
*4.8 Inelastic Axial Deformation
*4.9 Residual Stress

5. Torsion
5.1 Torsional Deformation of a Circular Shaft
5.2 The Torsion Formula
5.3 Power Transmission
5.4 Angle of Twist
5.5 Statically Indeterminate Torque-Loaded Members
*5.6 Solid Noncircular Shafts
*5.7 Thin-Walled Tubes Having Closed Cross Sections
5.8 Stress Concentration
*5.9 Inelastic Torsion
*5.10 Residual Stress

6. Bending
6.1 Shear and Moment Diagrams
6.2 Graphical Method for Constructing Shear and Moment Diagrams
6.3 Bending Deformation of a Straight Member
6.4 The Flexure Formula
6.5 Unsymmetric Bending
*6.6 Composite Beams
*6.7 Reinforced Concrete Beams
*6.8 Curved Beams
6.9 Stress Concentrations
*6.10 Inelastic Bending

7. Transverse Shear
7.1 Shear in Straight Members
7.2 The Shear Formula
7.3 Shear Flow in Built-Up Members
7.4 Shear Flow in Thin-Walled Members
*7.5 Shear Center for Open Thin-Walled Members

8. Combined Loadings
8.1 Thin-Walled Pressure Vessels
8.2 State of Stress Caused by Combined Loadings

9. Stress Transformation
9.1 Plane-Stress Transformation
9.2 General Equations of Plane-Stress Transformation
9.3 Principal Stresses and Maximum In-Plane Shear Stress
9.4 Mohr’s Circle-Plane Stress
9.5 Absolute Maximum Shear Stress

10. Strain Transformation
10.1 Plane Strain
10.2 General Equations of Plane-Strain Transformation
*10.3 Mohr’s Circle-Plane Strain
*10.4 Absolute Maximum Shear Strain
10.5 Strain Rosettes
10.6 Material Property Relationships
*10.7 Theories of Failure

11. Design of Beams and Shafts
11.1 Basis for Beam Design
11.2 Prismatic Beam Design
*11.3 Fully Stressed Beams
*11.4 Shaft Design

12. Deflection of Beams and Shafts
12.1 The Elastic Curve
12.2 Slope and Displacement by Integration
*12.3 Discontinuity Functions
*12.4 Slope and Displacement by the Moment-Area Method
12.5 Method of Superposition
12.6 Statically Indeterminate Beams and Shafts
12.7 Statically Indeterminate Beams and Shafts – Method of Integration
*12.8 Statically Indeterminate Beams and Shafts – Moment-Area Method
12.9 Statically Indeterminate Beams and Shafts – Method of Superposition

13. Buckling of Columns
13.1 Critical Load
13.2 Ideal Column with Pin Supports
13.3 Columns Having Various Types of Supports
*13.4 The Secant Formula
*13.5 Inelastic Buckling
*13.6 Design of Columns for Concentric Loading
*13.7 Design of Columns for Eccentric Loading

14. Energy Methods
14.1 External Work and Strain Energy
14.2 Elastic Strain Energy for Various Types of Loading
14.3 Conservation of Energy
14.4 Impact Loading
*14.5 Principle of Virtual Work
*14.6 Method of Virtual Forces Applied to Trusses
*14.7 Method of Virtual Forces Applied to Beams
*14.8 Castigliano’s Theorem
*14.9 Castigliano’s Theorem Applied to Trusses
*14.10 Castigliano’s Theorem Applied to Beams

APPENDICES
1. Geometric Properties of anArea
2. Geometric Properties of Structural Shapes
3. Slopes and Deflections of Beams
Fundamental Problems Partial Solutions and Answers
Selected Answers
Index
Sections of the book that contain more advanced material are indicated by a star (*).